Concrete Impregnating Agent - Decormania Adhesive & Accessory

Concrete Impregnating Agent 2L - Decormania Adhesive & Accessory – Deep Protection for Porous Surfaces, Rain or Shine

Concrete Impregnating Agent - Decormania Adhesive & Accessory is a water-based silicone sealer developed specifically for gypsum and concrete surfaces that demand both durability and aesthetic enhancement. Designed for use inside and out, it creates a hydrophobic barrier that shields porous materials while slightly intensifying their colour. Whether you're sealing [empty], sandstone, or roof tiles, this impregnation formula keeps your finish clean, rich, and protected from the elements.

Apply by spray for gypsum materials, or by brush/spray for concrete and other surfaces. Use in dry weather and temperatures between +5°C and +25°C. For highly absorbent concrete, a second wet-on-wet coat may be required within 20 minutes. Always test on a discreet area first, as colour enhancement may vary by material. For best results, allow at least 7 days after installation before sealing.

How Concrete Impregnating Agent - Decormania Adhesive & Accessory Makes Surface Care Effortless

• Hydrophobic silicone-based sealant that repels moisture and enhances surface tone
• Ideal for gypsum and concrete tiles, sandstone, roof tiles, and clinker
• Prevents staining, surface wear, and weather-induced fading
• Gypsum: spray only | Concrete: spray or brush application
• Apply second coat (wet-on-wet) on absorbent concrete if needed
• Dries evenly—no visible streaks or residue
• Always test first, as slight darkening of the surface may occur
  
  

Concrete Impregnating Agent – Technical Details

• Type: Water-dilutable silicone-based concrete and stone impregnator
• Volume: 2L
• Application: Interior and exterior use
• Coverage: 8–10 m² per container (single coat)
• Surface Prep: Clean, dry, free of dust, grease, and oils
• Application Method: Spray on gypsum; brush or spray on concrete and stone
• Second Coat: Apply wet-on-wet within 20 minutes if surface is highly absorbent
• Application Temperature: +5°C to +25°C
• Storage: Store between +5°C and +30°C in original sealed packaging
• Note: May alter surface tone—perform a patch test before full use
  
  

Give your concrete the care it deserves—lasting protection that brings out its best.